The EZ Lock wheelchair restraint system is a simple and effective means of securing an occupied wheelchair in a moving vehicle. Operation of the EZ Lock system couldn't be easier.

The automatic locking mechanism simply requires that you guide your wheelchair over the top of the lock until the interface on your wheelchair is fully engaged. Once you have reached your destination, release the wheelchair from the system with the touch of a conveniently located push-button switch.

The system is controlled by state of the art electronics, which are accessed through the user-friendly ECU control panel. This panel controls release, deactivation of the alarm for unoccupied use, and an array of warning indicators to advise you of the status of the system.

The Freedom You Deserve

The EZ Lock wheelchair restraint system provides the physically challenged driver, or passenger, a degree of independence not possible with other systems. The EZ Lock system does not require cumbersome tiedown belts or straps to be attached to the wheelchair, and an attendant is not needed to engage or release the system.

Numerous safety features have been built into the EZ Lock system, these include:

• Sturdy all steel construction
• Visual & audible alarms
• Dependable solid state electronics
• Ignition inhibited release circuit
• Emergency manual release

Our system has been independently tested to the 30mph/20g standard. In these test the EZ Lock system has consistently proven its effectiveness at securing the wheelchair, on the crash sled and in real life collisions.

EZ Lock has a proven track record, and we have many testimonials from satisfied users actually involved in severe collisions. You may view some of these user testimonials by clicking on the button to your left. The testimonials illustrate the superb performance of the EZ Lock wheelchair restraint system, when it really counts.

How It Works...

The basic EZ Lock system consists of two main components, the EZ Lock base and the wheelchair mounted hardware. The EZ Lock base, which is mounted to the floor of the vehicle, is a low profile docking station (8"W x 10"L x 2.25"H) constructed of heavy gauge 3/16" steel.

The EZ Lock base acts as the receiver for the heavy duty 5/8" docking pin, which is attached to the wheelchair.

The base and wheelchair mounted hardware are designed to withstand repeated operation and when properly maintained will provide many years of service.

The wheelchair mounted hardware is designed for your specific wheelchair, and hardware is available for most of the popular wheelchairs manufactured in the United States, Canada and Europe.

PRODUCTS

BL-6290

The BL-6290 base lock is the heart of the EZ Lock system. The casing is made of sturdy 3/16” powder coated steel, and the locking jaws are ¼” steel coated with a permanently bonded lubricant. Entry into the lock is mechanical, and release is effected by an electrical pull solenoid. An emergency mechanical release is also incorporated in case the vehicle loses power. The base lock is mounted to the floor of the vehicle, and acts as the receiver for the interfacing pin mounted to the wheelchair.

ECU-2 Control Panel

The ECU-2 is the main user interface for the EZ Lock system. The functions of the ECU-2 include release, alarm buzzer deactivation for unoccupied use, and an array of warning indicators. The green light signifies that the locking jaws are completely closed and the system is safe to use. The yellow indicator light means that the locking jaws are not completely closed, and the user should exit, then re-enter the base lock. The red light indicates that the system has been de-activated for unoccupied use only.