|
Now you can enjoy owing a pickup
truck along with the advantage of storing your folding wheelchair
inside, out of the weather.
The Cab-Sider gives you the
advantage of driving a pickup while being able to store your chair
inside, out of the weather. The truck bed is free to use for other
things and can even be equipped with a cap, if desired.
 Bruno's
Cab-Sider is compact enough to allow small items or soft luggage
to be placed in the cab area when the chair is stored. Simple
installation means easy removal when it comes time to trade in
your vehicle.
The Cab-Sider is simple to operate. This easy to use wheelchair
lift is electrically powered. All you need to do is roll the chair
next to the vehicle, transfer and then use the hand-held
controller to do the rest. Unloading the chair is just as simple
and trouble-free.
Bruno also offers the EZ RIZER™ seat lift system to assist
wheelchair users that may find it difficult to transfer into and
out of full-size trucks.
The Cab-Sider is available for any full size or compact truck that
features an extended cab with a fourth door. This includes Dodge
Ram, Chevy S-10, Chevy C/K, Siverado, GMC Sonoma, GMC Sierra and
the Ford F-150, F-250 and F-350.
Expert installation and complete
after-sale service is provided by Bruno's nationwide and
international network of dealers.
BACK-SAVER™
BRUNO MODEL AWL-1600
 Now
you can enjoy owing a pickup truck along with the advantage of
storing your folding wheelchair inside, out of the weather.
The Back-Saver is
simple to operate and does not require any manual lifting. Just
fold the chair up and roll the chair onto the platform. Turn the
key to the ON position and depress the rocker switch to the UP
position. Unloading the chair is just as simple and trouble-free.
The Back-Saver is rated to handle most folding wheelchairs with
22-inch or larger rear wheels, weighing 70 lbs. or less.
Bruno's Back-Saver will fit a standard Class I hitch tongue or a
Class II or Class III if an adapter is used. And the Back-Saver
features a strong tubular frame, for structural rigidity and long
term durability.
A
self-locking hold-tite bar is an integral part of the Back-Saver
and is designed to grip the chair firmly during transport, without
marring its finish.
In addition, the Back-Saver meets state and federal D.O.T.
regulations for license plate illumination and visibility. The
Back-Saver also includes an extra brake light for security and
peace of mind.
Expert installation and complete after-sale service is provided by
Bruno's nationwide and international network of dealers.
OUT-RIDER®
BRUNO MODEL PUL-1100
 Now
you can load your wheelchair or fully-assembled scooter into the
bed of your pickup from inside the cab
The Out-Rider can be installed behind the cab on either the
driver's or passenger's side of the truck. It is fully automatic
and draws its power from the vehicle's battery. No welding is
required and the unit is completely weatherized.
Expert installation and complete after-sale service is provided by
Bruno's nationwide and international network of dealers.
 The
Out-Rider will add a new dimension to your lifestyle. The
hand-held controller is simple and easy to operate. Just press a
button and the Out-Rider does the rest.
Bruno also offers the EZ RIZER™ seat lift system to assist
wheelchair or scooter users who may find it difficult to transfer
into and out of full size trucks or 4x4's. Plus, Bruno's POW'R
TOPPER™ covers your scooter or wheelchair in the truck's bed.
Call Bruno's Technical Applications Department for additional
information about other great products.
WHEELCHAIR-LIFTER
BRUNO MODEL AWL-100
Eliminates the struggle of lifting
and storing your folding wheelchair in the trunk of your car or
van.
 The
Wheelchair-Lifter raises and tilts your wheelchair horizontally,
all at the touch of a button. You don't need to struggle any
longer to get your wheelchair in and out of the trunk of your car.
Bruno's Wheelchair-Lifter can also be adapted as the Model AWL-150
to raise your wheelchair vertically for storage in a full size van
or minivan.
The Wheelchair-Lifter is an
electrically operated lift that draws its power from the vehicle's
battery. Raising and lowering the wheelchair is as easy as
touching a button. When the wheelchair is above the trunk, simply
swing the lift arm in and push the DOWN button, then fold the lift
arm down.Bruno's Wheelchair-Lifter raises and stores your
wheelchair in just a few seconds. No more struggling and awkward
lifting. The work is done for you.
The
Wheelchair-Lifter can be installed in most auto trunks, station
wagons, vans, minivans, sport utility vehicles and hatchbacks as
long as the storage area is large enough to accommodate your
folding wheelchair.
Bruno's Wheelchair-Lifter is a cost efficient way of loading and
unloading your manual folding wheelchair into the back of your
vehicle.
Expert installation and complete after-sale service is provided by
Bruno's nationwide and international network of dealers.
WHEELCHAIR-LIFTER - BACK HATCH WHEELCHAIR LIFT
BRUNO MODEL AWL-150
 Eliminates
the struggle of lifting and storing your folding wheelchair in a
Full-Size Van or Minivan..
The lift and
wheelchair fit snugly in your van. In some instances, rear-seats
may remain in the van.
You don’t need to struggle any longer to get your wheelchair in
and out of your van or minivan. The Wheelchair-Lifter Models
AWL-150 raises a wheelchair vertically into the rear door of your
full-size van or minivan, all at the touch of a button. Plus,
Bruno’s Wheelchair-Lifter Model AWL-100 can lift and store your
wheelchair into the trunk of a car.
Bruno’s
Wheelchair-Lifter raises and stores your wheelchair in just a few
seconds. No more struggling and awkward lifting. The lift does the
work for you.
The Wheelchair-Lifter is an electrically-operated lift that is
powered off the vehicle’s battery. When the wheelchair is next to
the bumper, easily attach the chair to the lift’s docking device
and push the UP button to raise the wheelchair above the bottom of
the door opening. Then, simply swing the lift arm and wheelchair
into the vehicle and push the DOWN button--it is as simple as
that.
The
Wheelchair-Lifter Models AWL-150 can be installed in most
full-size vans and minivans as long as the storage area is large
enough to accommodate your folding wheelchair.
Bruno’s Wheelchair-Lifter is a cost-efficient way of loading and
unloading your manual folding wheelchair into your vehicle.
Expert installation and complete after-sale service is provided by
Bruno's nationwide and international network of dealers.
WHEELCHAIR-LIFTER -
SIDE DOOR WHEELCHAIR LIFT
BRUNO MODEL AWL-160
 Eliminates
the struggle of lifting and storing your folding wheelchair in a
Full-Size Van or Minivan..
The lift and wheelchair fit snugly in your van. In some instances,
bucket or rear-seats may remain in the van.
You don’t need to struggle any longer to get your wheelchair in
and out of your van or minivan. The Wheelchair-Lifter Model
AWL-160 raises a wheelchair vertically into the side door of your
minivan, all at the touch of a button. Plus, Bruno’s
Wheelchair-Lifter Model AWL-100 can lift and store your wheelchair
into the trunk of a car.
Bruno’s
Wheelchair-Lifter raises and stores your wheelchair in just a few
seconds. No more struggling and awkward lifting. The lift does the
work for you.
The
Wheelchair-Lifter is an electrically-operated lift that is powered
off the vehicle’s battery. When the wheelchair is next to the
bumper or side door, easily attach the chair to the lift’s docking
device and push the UP button to raise the wheelchair above the
bottom of the door opening. Then, simply swing the lift arm and
wheelchair into the vehicle and push the DOWN button--it is as
simple as that.
The
Wheelchair-Lifter Models AWL-160 can be installed in most minivans
as long as the storage area is large enough to accommodate your
folding wheelchair.
Bruno’s Wheelchair-Lifter is a cost-efficient way of loading and
unloading your manual folding wheelchair into your vehicle.
Expert installation and complete after-sale service is provided by
Bruno's nationwide and international network of dealers.
|
