|
Lets you carry your scooter fully
assembled and keeps your trunk space available for other things.
The Out-Sider III® is easy to operate. Just turn the key and move
the control lever to the position marked ARROW UP or ARROW DOWN.
The unit automatically lifts and lowers the power chair. The chair
is then securely held with a unique 4 point color coded strap
system.
 The
Out-Sider III can raise and store power chairs weighing up to 300
lbs., using a Class III hitch with a 2" receiver. The Out-Sider
III system is superior to any other rear exterior lift. The unit
is powder coated and assembled with stainless steel fasteners for
long life. In addition to these features, a special weight sensing
device determines if there is a power chair on the platform and
will fold the lift into the storage position when empty.
Bruno's Out-Sider III features an ON-OFF key for greater security,
and an automatic emergency safety latch prevents the platform from
lowering. As a result, the Out-Sider III gives you an easy to use,
secure way to transport your power chair.
The Out-Sider III is powered by your vehicle's battery and is
delivered fully equipped, including a lighted license plate
holder, reflectors and a center brake light for added safety.
BIG-LIFTER™
 Now
you can lift your scooter weighing up to 300 pounds and place them
in the rear of most vans, minivans and sport utility vehicles.
The Bruno Big-Lifter is electrically powered from the vehicle's
battery.
Simply press a button on the controller and the Big-Lifter™ raises
and lowers your fully assembled power chair weighing up to 300
pounds, allowing you to manually swing it in or out of the
vehicle. Minimum strength is required.
The Bruno Big-Lifter manual swing has a low-resistance design that
is easy to swing in and out, and comes complete with a lifting
device designed specifically for the power chair.
The
Bruno Big-Lifter is a fully adjustable lift that can be installed
in just a few hours and requires no structural modification to the
vehicle.
The Bruno Big-Lifter securely stores your scooter or power chair
in the rear of most vans, minivans and sport utility vehicles:
positioned behind the rear seat.
Expert installation and complete after-sale service is provided by
Bruno's nationwide and international network of dealers.
CURB-SIDER SUPER
XL®
 The
lift of choice for storing your fully or partially assembled
scooter or power chair weighing up to 300 pounds in the rear of
your van or minivan, sport utility, pickup truck or some station
wagon applications.
The Curb-Sider Super XL lift is electronically powered from the
vehicle's battery. Simply press a button on the hand-held
controller and the Curb-Sider Super XL raises and lowers your
power chair.
Bruno's Curb-Sider Super XL provides up to 180 degrees of powered
rotation, which makes it easy to raise, lower and rotate a fully
or partially assembled scooter or power chair on the curb at the
side of your vehicle or directly behind it.
Bruno's Curb-Sider Super XL can end the struggle of manually
trying to lift and store a scooter or power chair in your vehicle.
The Curb-Sider Super XL gives you the convenience you need to
transport your power chair or scooter and the freedom to travel
where you like.
The
Bruno Curb-Sider Super XL is designed to fit most types of full
size vans, as well as minivans, sport utility vehicles, pickup
truck and some station wagon applications.
The Bruno Curb-Sider Super XL is equipped with a low profile lift
arm with angle adjustment that allows the placement of larger
power bases into smaller vehicle openings. The installation does
not require any structural modifications to your vehicle. A custom
base is included to provide a neater and easier installation.
Expert installation and complete after-sale service is provided by
Bruno's nationwide and international network of dealers.
CURB-SIDER SUPER
XL3®
 Outer
Arm provides for a 6” powered telescoping extension. Combined with
6” of positioning allows for a 12” total adjustment.
The BRUNO VSL-690 CURB-SIDER SUPER XL3 is a lift for the rear of
minivans, full-size vans, sport utility vehicles and station
wagons.
The BRUNO VSL-690 CURB-SIDER SUPER XL3 3-axis control unit allows
wider and larger scooters, power wheelchairs and equipment to fit
into smaller vehicle openings like the new 2001 Daimler Chrysler
minivan (with a power hatch).
This unique new lift is easy to operate with an ergonomic control
pendent and can lift up to 300 lbs. A 200 lb. lifting capacity
version for smaller vehicles such as the Daimler Chrysler PT
Cruiser is available.
Expert installation and complete after-sale service is provided by
Bruno's nationwide and international network of dealers.
|
