|
The Out-Sider III®
is simple to operate. Just turn the key and move the control lever
to the position marked ARROW UP or ARROW DOWN. The unit
automatically lifts and lowers the scooter, as well as raising and
lowering the hold-tite lock-down mechanism.
 The
Out-Sider III can raise and store 3 or 4 wheel scooters weighing
up to 300 lbs., using a Class III hitch with a 2" receiver. The
Out-Sider III system is fully automatic and is superior to any
other rear exterior lift. The unit is powder coated and assembled
with stainless steel fasteners for long life. In addition to these
features, a special weight sensing device applies exactly the
right amount of pressure to the hold-tite device to secure the
scooter.
Bruno's Out-Sider III features an ON-OFF key for greater security,
and an automatic emergency safety latch prevents the platform from
lowering. As a result, the Out-Sider III gives you an easy to use,
secure way to transport your scooter.
The Out-Sider III is powered by your vehicle's battery and is
delivered fully equipped, including a lighted license plate
holder, reflectors and a D.O.T. approved center brake light for
added safety.
Expert installation and complete after-sale service is provided by
Bruno's nationwide and international network of dealers.
SPACE-SAVER™
 Exceptional
versatility with Bruno's take-apart lift, to help you store your
scooter in vehicles with smaller trunks.
The Space-Saver is a take-apart lift that solves the problem of
storing a scooter in smaller vehicles with limited trunk space.
The Space-Saver fits closer to the interior trunk wall providing a
tighter arc when manually swinging the scooter in and out of the
trunk. This allows scooters to be stored in spaces that won't work
with more conventional lift designs, and the rotation of the lift
arm makes it possible to raise and lower the scooter at the rear
or side of the vehicle.
The
Space-Saver can be stored anywhere, in the trunk or inside the
vehicle itself. And when an additional tower base installation kit
is ordered, the lift can be used in more than one vehicle. Contact
Bruno's Technical Application Department
The Space-Saver is fully adjustable for height and length and can
raise scooters weighing up to 180 lbs. (82 kgs). The lift's tower
base can be easily adjusted to fit nearly any car's trunk,
ensuring a useful, reliable installation.
The Space-Saver is lightweight and assembly and disassembly can be
completed in three simple steps, quickly and easily.
Expert installation and complete after-sale service is provided by
Bruno's nationwide and international network of dealers.
OFFSET SPACE-SAVER™
 Now
you can load your scooter in the trunk of your compact sedan with
this unique offset lift from Bruno.
The Offset Space-Saver from Bruno gives you the flexibility to
load a partially assembled scooter in the trunk of today's smaller
cars. The unique offset design of the lift arm allows you to
position your scooter inside narrow trunk openings.
The Offset Space-Saver permits lift installations for vehicles
with trunks that previously were considered too small. This means
that you don't have to purchase a different type of car. And it
means you don't have to go without the benefit of a lift any
longer.
The
Offset Space-Saver is designed with a low-profile outer arm lift
assembly to make storing your scooter even easier. All controls
are located conveniently on top of the lift arm. Just press a
button and the Offset Space-Saver eliminates the struggle of
raising and lowering your scooter.
The Offset Spacer-Saver can be stored anywhere, in the trunk or
inside the vehicle. It disassembles quickly and easily, requiring
only three steps. When an additional tower base assembly is
ordered, it can even be used in more than one vehicle. Contact
Bruno's Technical Application Department for installation details.
The Offset Space-Saver can raise and store many types of
three-wheel scooters weighing up to 180 lbs, with either front or
rear drive.
Expert installation and complete after-sale service is provided by
Bruno's nationwide and international network of dealers.
SCOOTER-LIFT JR®
 Now
you can lift and store your scooter in the trunk of your auto the
easy way. It can also be adapted for some station wagons and
hatchbacks.
The Scooter-Lift Jr. lift is electrically powered from the
vehicle's battery. Simply press a button on the controller and the
Scooter-Lift Jr. raises and lowers your scooter, effortlessly.
Bruno's Scooter-Lift Jr. can be adapted to operate in station
wagons and hatchbacks. This versatility can provide a significant
benefit when a new vehicle purchase is not in your budget.
Bruno's Scooter-Lift Jr. can end the struggle of manually trying
to lift and store a scooter in the trunk or hatch opening of your
vehicle. The Scooter-Lift Jr. gives you the convenience you need
to transport your scooter, and the freedom to travel when and
where you want to.
The
Scooter-Lift Jr. was designed to help raise and store
three-wheeled scooters in most auto trunks, station wagons or
hatchbacks, as long as the opening is large enough to accept the
partially disassembled scooter and compact lift.
The Scooter-Lift Jr. is also available with the added option of a
spring-assist feature. This further reduces the effort needed to
raise and lower the lift arm before and after use.
Expert installation and complete after-sale service is provided by
Bruno's nationwide and international network of dealers.
SCOOTER-LIFT SR®
 Now
you can lift and store your fully assembled scooter in the rear of
your van or minivan the easy way.
The Scooter-Lift Sr. is electrically powered from the vehicle's
battery. Simply press a button on the controller and the
Scooter-Lift Sr. raises and lowers your scooter, allowing you to
manually swing it in or out of the vehicle.
The Scooter-Lift Sr. is also available as the VSL-560, featuring
Bruno's exclusive Patented Adjustable Sub-Base. The Adjustable
Sub-Base fits most vans, adds stability, is compact and allows for
faster, simpler installation.
Bruno's Scooter-Lift Sr. can end the struggle of manually trying
to lift and store a scooter in your van or minivan. The
Scooter-Lift Sr. gives you the convenience you need to transport
your scooter and the freedom to travel when and where you like.
The
Bruno Scooter-Lift Sr. makes taking your scooter with you simple
and easy. No need to remove and store the seat, and our custom
manufactured C-Arm and T-Bar Docking Device allow you to raise you
scooter at the touch of a button.
The Scooter-Lift Sr. is also available with the added option of a
spring-assist feature. this reduces the effort needed to raise and
lower the lift arm before and after use.
Expert installation and complete after-sale service is provided by
Bruno's nationwide and international network of dealers.
BIG-LIFTER™
 Now
you can lift your scooter weighing up to 300 pounds and place them
in the rear of most vans, minivans and sport utility vehicles.
The Bruno Big-Lifter is electrically powered from the vehicle's
battery.
Simply press a button on the controller and the Big-Lifter™ raises
and lowers your fully assembled power chair weighing up to 300
pounds, allowing you to manually swing it in or out of the
vehicle. Minimum strength is required.
The Bruno Big-Lifter manual swing has a low-resistance design that
is easy to swing in and out, and comes complete with a lifting
device designed specifically for the power chair.
The
Bruno Big-Lifter is a fully adjustable lift that can be installed
in just a few hours and requires no structural modification to the
vehicle.
The Bruno Big-Lifter securely stores your scooter or power chair
in the rear of most vans, minivans and sport utility vehicles:
positioned behind the rear seat.
Expert installation and complete after-sale service is provided by
Bruno's nationwide and international network of dealers.
CURB-SIDER®
 Now
you can lift and store your fully assembled scooter in the rear of
your van or minivan the easy way.
Bruno's Curb-Sider can end the struggle of trying to manually lift
and store a scooter in your van or minivan. The Bruno Curb-Sider
was designed to fit most types of vans, minivans, sport utility
vehicles and pickups with caps. Plus, the Curb-Sider can be
adapted for use with some types of power wheelchairs, increasing
its versatility.
The Curb-Sider lift is electrically powered from the vehicle's
battery. Simply press a button on the hand-held controller, and
the Curb-Sider raises and lowers any scooter weighing up to 200
lbs., effortlessly.
Bruno's
Curb-Sider provides a unique 180 degree powered rotation, which
makes it possible to raise, lower and rotate a fully assembled
scooter on the curb, at the side of your vehicle, or directly
behind it. The Curb-Sider's rotation feature allows it to stow
scooters in vehicles with tailgates.
The lift arm can be folded vertically when not in use and
installation does not require any structural modifications to your
vehicle.
Expert installation and complete after-sale service is provided by
Bruno's nationwide and international network of dealers.
SCOOTER LIFT II
 Lift
and store your fully assembled scooter or wheelchair through
either side sliding door of minivans.
The Scooter-Lift II can raise and store a fully assembled scooter
or wheelchair through the driver's or passenger's side sliding
door of minivans, and passenger side doors of full size vans.
The Scooter-Lift II requires very little arm strength, balance or
effort to use. It is so compact that even in a minivan, there is
still enough room for three passengers to sit comfortably in the
rear seat. With scooter removed, or when traveling without the
scooter, entry and exit is easy since the door opening remains
unobstructed.
Bruno's
Scooter-Lift II also features an optional installation assembly
that eliminates drilling any holes in the floor of the vehicle.
This means easier removal when it comes time to transfer the lift
in and out of a minivan. Contact Bruno's Technical Applications
Department about specific applications for this system.
The Scooter-Lift II can be used for either three-or four-wheel
scooters and manual folding or power wheelchairs weighing up to
200 lbs. (91k). The Scooter-Lift II's hand-held controller makes
this lift simple and easy to use. The Scooter-Lift II uses
electrical power from the vehicle's battery and all lift
operations are automatic. You only need to help guide the scooter
or wheelchair into place.
Expert installation and complete after-sale service is provided by
Bruno's nationwide and international network of dealers.
|
