For busy employees, to assist disabled individuals, or for anyone who finds a closed door a problem... Power Access door opener can make comings and going easier.

• No modification of the door or jambs
• Plugs right into a regular 115vac wall outlet
• Complete instructions are packed with every unit
• Virtually maintenance free (a couple of drops of oil and a bit or grease every year is all it takes)

VERSATILE APPLICATIONS

• Fits in most interior and some exterior door applications
• Left and right hand units are available
• Jamb mount, to push door open or door mount, to pull door open.
• Inverted model, for limited room above the door
• Deep reveal and door mounted units for special applications

BUILT-IN SAFETY FEATURES

• The operator arm is not attached to the door. Instead, a wheel at the end of the operator arm rolls against the face of the door, pushing the door open.
• The door can always be opened manually from either side without involving the operator.
• Traffic flow is not hindered by the operator.
• The Power Access opener is always used in conjunction with a conventional manual door closer, either surface-mounted or concealed.
• Built-in load sensing circuit automatically stops the operator arm and returns to the at-rest (closed) position, if the door meets an obstruction during the opening cycle.
• Thermally protected drive motor
• Adjustable door hold-open time.

AN ARRAY OF COMPANION CONTROLS

• Push Plate Wall Switches
• Push Button Wall Switches
• Touch Plate Wall Switch
• Coded Radio Transmitter/Receiver
• Keyless Entry Systems
• Electric Door Lock (Strike)

 

(#44665-top) (#44885 -bottom)	Push Plate Wall Switches Choice of 21/4" square push plate on Model 4466, or 5" square push plate on waterproof, heavy duty Model 4448. Available as wired-in version with 12 feet of 2 lead wire, or as wireless type switch which does not need to be wired to operator. Wireless signal is coded to prevent signal duplication or frequency overlap in multiple unit installation. Available in surface or flush mount wall box
(#446658)	Push Button Wall Switches Heavy duty switch Supplied in push button configuration with separate wall mount Available as wireless type switch, or as wired version which includes 12 feed of two lead wire Specify surface mount wall box or flush mount
	Touch Plate Wall Switches No pressure necessary - senses the capacitance of a hand when touched. Stainless steel touch plate combines appearance and low maintenance. Low profile reduces vandalism No moving parts - explosion proof Includes 12 feet of 3 conductor low voltage wire Available with or without handicap emblem Available in surface mount switch (Model 4444S) or flush mount (Model 4444F)
	Coded Radio Transmitter/Receiver Automatic door operation for specified individuals 1,024 possible codes eliminates signal duplication and frequency overlap 1,2 or 4 button transmitters available (Models 4440). Can be used to provide given individuals access to different combinations of specified areas Transmitters require a receiver (Model 4470) to actuate door opening cycle, the receiver is mounted inside the operator Special transmitters with raised buttons are available
	Keyless Entry Systems Provide access for specified individuals Available as wireless or wired type switches Coded wireless signal
	Electric Door Lock (Strike) Permits door to be secured when closed, but releases automatically when opener receives signal Models for metal or wooden jambs Silent operation