Zippie® GS

The Zippie® GS was designed to easily 'grow' without the need for new parts. So as a child grows, the Zippie GS grows with them. The Zippie GS provides a wide range of width, seat depth and other key positioning adjustments. Reversible wheel configuration, an all new universal axle plate and unique side frames add even more flexibility and stability.

• The Zippie GS has dual seat rails to allow for ease in installing seating systems, armrests, wheel locks and other accessories without interference problems.

• The Zippie GS has been designed to interface with a wide variety of seating systems. Most solid seat and backs, custom seat and backs and drop seats will mount easily to the frame. A growing solid seat pan is also available.
• A fully adjustable, universal axle plate allows the Zippie GS to be set up in: standard or reverse configuration, with a seat to floor height under 13", utilizing 12"-24" rear wheels.
• One-arm drive available.
• The universal axle plate allows half-inch vertical and horizontal adjustments to provide increased wheel access without sacrificing growth potential.
• The Zippie GS with its universal axle plate meets the child's needs today and can be adjusted to meet their needs in the future.
• The Zippie GS is also available with the Sunrise Transit Option. Children often remain in their wheelchairs while being transported to school or play. Sunrise is the first manufacturer to offer an option that addresses transit safety for children in wheelchairs.
• The Zippie GS is available with 11 rear wheel, 11 front caster and many armrest and front hanger options. The Zippie GS is available in 14 standard and 3 custom colors.

Zippie® TS

The Zippie® TS is designed with an active 45 degree range of tilt-in-space. The tilt can be adjusted 5 degrees forward or rearward on its lightweight, aluminum base. In addition to a large selection of footrest and armrest styles, the Zippie TS is available with one or two mechanical tilt locks, and a fixed or swing-away front frame at no additional charge.

• The Zippie TS offers 45 degrees of posterior tilt to provide the child with the ideal sitting position. The tilt is operated through one or two mechanical tilt locks for easy tilting.

• One thing unique to the pediatric market is that children grow. The Zippie TS is designed to grow with your child in both seat width and seat depth. There are three frame widths available with built in width adjustments and one upper frame to accommodate seat depths from 10" to 20".

• The Zippie TS is designed to be a dependent or independent mobility base. For the child who relies on a caregiver for their mobility the TS can be out fitted with 12" or 16" rear wheels and a removable stroller handle for a small easy to maneuverable package. For the independent pusher the TS can be outfitted with 20", 22" or 24 " rear wheels and even a one-arm drive option to maximize their independence.

• The Zippie TS has been designed to interface with a wide variety of seating systems. Most solid seat and backs, custom seat and backs and drop seats will mount easily to the frame. A growing solid seat pan is available for seat depths between 14" and 18".

• The Zippie TS back plate allows for seat depth adjustment and an open or closed seat to back angle to further enhance the child's sitting posture.

• The rigid frame construction (non-folding) of the Zippie TS makes it a very durable and efficient wheelchair. Even with its' rigid design the TS is designed to disassemble and can be loaded into most cars for transport.

• The Zippie TS is also available with the Sunrise Transit Option. Children often remain in their wheelchairs while being transported to school or play. Sunrise is the first manufacture to offer an option that addresses transit safety for children in wheelchairs.

• The Zippie TS is available with 9 rear wheel, 10 front caster and many armrest and front hanger options to chose from.

• The Zippie TS is available in 14 standard and 3 custom colors.

Quickie® Z-500

The Quickie® Z500 is a full-featured, high-performance power chair in a kid's size. The chair comes standard with 30 degrees of tilt-in-space adjustment to accommodate functional and positional needs. The Zippie® Z-500 also responds when a rider's needs change. Growth kits allow the chair to grow with the rider.

• Removable stroller handle snaps easily into place allowing parent to push child's chair if needed.

• If the child needs the chair to tilt the Z-500 can have a TK Power Tilt system added to it.

• Unique seat design allows for multiple growth adjustments.

• Quickie® Z-500 base accepts Kid Kart® Xpress seating for the easy switch between manual and power mobility.

Zippie®

The easy-pushing Zippie® wheelchair is both rigid and adaptable. Its rigid frame construction is durable and strong. The open frame design allows for easy integration of seating systems. The Zippie also features a wide range of adjustments and swing-away footrests. Designed with growth in mind, each chair comes with one free growth kit.

• The rigid frame construction (non-folding) of the Zippie makes it a very durable and efficient wheelchair. Even with its' rigid design the Zippie is designed to disassemble and can be loaded into most cars for transport.

• The rigid construction does not limit the Zippie's ability to grow and adjust to your child's needs.

• Seat depth on the Zippie is accomplished by adjusting the backposts forward or back. The seat depth is adjustable for 10"-16" in 1" increments to ensure the proper fit and seating posture is achieved for the child.

• The Zippie is designed to be a dependent or independent mobility base. For the child who relies on a caregiver for their mobility, the Zippie can be outfitted with 12" or 16" rear wheels and a removable stroller handle for a small easy to maneuverable package. For the independent pusher the Zippie can be outfitted with 20", 22" or 24 " rear wheels.

• The Zippie has been designed to interface with a wide variety of seating systems. Most solid seat and backs, custom seat and backs and drop seats will mount easily to the frame.

• The Zippie is also available with the Sunrise Transit Option. Children often remain in their wheelchairs while being transported to school or play. Sunrise is the first manufacturer to offer an option that addresses transit safety for children in wheelchairs.

• The Zippie is available with nine rear wheel, 7 front caster, and other armrest and hanger options.

• The Zippie is available in 14 standard colors.

Zippie® 2

The Zippie® 2 is a light-weight, folding chair designed just for children. Its locking brace gives it an easy-pushing, solid feel. It's also extremely adjustable and has the ability to grow with a child. Swing-away footrests and quick-release components make it easy to transport.

• One time Free Growth Kit allows the chair to be grown free of charge.

Quickie® Kidz

The Quickie® Kidz is a ridged frame wheelchair designed for use by toddlers. With a very low seat to floor height the Kidz will keep the child at the same level as their peers, preventing them from feeling, and being observed as different. A tall stroller handle makes it easy for the caregiver to push the chair without getting a sore back.

• Folding or nonfolding backrest.

• Stroller handle option.

• Front anti-tip tube option.

• Designed for a child's self-propulsion.

• Low seat heights help to facilitate a child's independent transfers.

Kid Kart Xpress

The Kid Kart Xpress was designed to have all the functions, features and benefits of appropriate seating and positioning but to also maintain the appearance of a stroller. Now children with special needs can be noticed not for the equipment that they sit in but for the beautiful children that they are.

• Cosmetically appealing to parents-resembles a standard stroller.

• Lightweight, compact and easy to maneuver, transport and stow.

• Removable seating shell can face forward or face rearward towards parents.

• Seating shell tilts in space from 20 degrees anterior to 45 degrees posterior.

• Standard seating shell includes an adjustable seat-to-back angle.

• Optional 45 degrees of recline available.

• Highly adjustable standard or contoured seating accommodates growing kids.

• Ergonomically correct adjustments at the hip, knee and ankle pivot points.

• Many secondary seating and positioning options available.

• Height and angle adjustable sun shade with child view window.

Kid Kart TLC